Replacing A Fusing Unit - Konica Minolta bizhub C3850 User Manual

2.2 Replacing consumables
2.2.7

Replacing a Fusing Unit

After the Fusing Unit replacement message has appeared, printing is possible, but the printing quality re-
duces. Immediately replace the Fusing Unit.
7CAUTION
- The Fusing Unit is too hot. It may cause a burn injury; therefore, leave the Fusing Unit out for 20 minutes
or more until it reaches room temperature after turning the power off. Then, replace the Fusing Unit.
1
Turn off the power of this machine.
2
Pull the lever (1), then open the Right Door (2).
% When opening the Right Door, be sure to fold the Manual Feed Tray in advance.
3
Open the Fusing Cover.
[Maintenance/Troubleshooting]
2
2-22