Administrator Feature Level; Ce Authentication - Konica Minolta bizhub C203 Service Manual

11. Enhanced Security
11.3.3

Administrator Feature Level

Functions • To set which modes to be allowed for the administrator to use in Service Mode.
Use • Use when allowing the administrator to use some modes in Service Mode.
• The modes allowed for the administrator to use in each setting are as follows.
[System Setting] →
[Expert Setting]
[Standard Size
Setting]
Setting/ • The default setting is Prohibit.
Procedure
11.3.4

CE Authentication

• It will not be displayed when the following settings are set to "ON".
[Administrator Settings]
Rules].
Functions • To determine whether or not to authenticate CE password as entering Service Mode.
Use • Use when authenticating CE password as entering Service Mode.
NOTE
• For setting the following setting to "ON", set the CE Authentication to "ON"
and change the initial CE password beforehand.
[Administrator Settings] → [Security Setting] → [Enhanced Security Mode] or
[Password Rules]
Setting/ • The default setting is OFF.
Procedure
11.3.5 IU Life Stop Setting
Functions • To select whether or not to stop a print cycle when the IU reaches its service life.
Use • Use to select not to stop the print cycle when the IU reaches its service life.
Setting/ The default setting is Stop.
Procedure
426
Administrator settings function
Printer
Erase Leading Edge
Adjustment
Leading Edge Adjustment
Centering
Scanner
Adjustment
Horizontal Adjustment
Vertical Adjustment
Centering
Original Stop Position
ADF Adjust-
ment
Centering Auto Adjustment
Auto Adj. of Stop Position
Original Glass Original Size Detect
Foolscap Size Setting
Level1
→ →
[Security Setting]
ON
"Stop"
Field Service Ver. 1.0 Jul. 2007
Level2 "Prohibit"
[Enhanced Security Mode] or [Password
"OFF"
No Stop
Level 1 Level 2
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯