15
15.1.1 Chart of Setting Items on Utility Screens
This section uses a systematic chart to describe the setting items provided
on layered Utility Screens.
This chart includes not only the Administrator Setting items to be performed
by an administrator but User Setting items described in Section 14, network/
scanner setting items, and fax setting items.
Administrator Security Level
The Administrator Security Level setting in the Administrator Setting can al-
low general users to specify some settings to be performed regularly by an
administrator.
The settings that can be performed by general users are classified into two
levels according to its importance. With Level 2 settings allowed, the users
can perform more administrative settings.
For details and procedure of the settings allowed in the User Setting mode,
see appropriate pages in this Administrator Setting section.
!
Detail
For the Administrator Security Level setting, see "Administrator Security
Level" on page 15-125.
Marks and indication in the chart
The dimmed items will be allowed in User Setting mode by the Administrator
Security Level setting.
For details of the items marked with "*", refer to the User's Guide [Network
Scanner Operations].
For details of the items marked with "**", refer to the IC-204 User's Guide.
For details of the items marked with "***", refer to the User's Guide [Box Op-
erations].
For details of the items marked with "****", refer to the User's Guide [Fax Op-
erations].
For details of the items marked with "*****", contact your service representa-
tive.
15-4
Utility <Administrator Setting>
bizhub 500/420