Jam; Service Call Counter; Warning; Maintenance - Konica Minolta bizhub C250 Service Manual

Hide thumbs Also See for bizhub C250:

Table of Contents

Field Service Ver. 1.0 Jul. 2005

Jam

• To check the number of misfeeds that have occurred at different locations in the

• To clear the count of each counter.

• To check the number of paper misfeeds that have occurred

• To clear the count of a counter, select the specific part and press the Clear key.

• If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing

• To check the number of malfunctions that have occurred at different locations in the

• To clear the count of each counter.

• To check the number of malfunctions that have occurred

• To clear the count of a counter, select the specific part and press the Clear key.

• If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing

• To check the number of warning conditions detected according to the warming type

• To clear the count of each counter.

• To check the number of warning conditions that have been detected

• To clear the count of a counter, select the specific part and press the Clear key.

• If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing

• When a warning condition occurs, an oil mark appears at the lower left corner of the

Basic screen.

• Touching the oil mark will display the warning code screen.

• To set a count value for maintenance of any given part.

• When any given part is replaced.

• Enter the maintenance counter value from the 10-Key Pad.

Maint.-Count

• Counts up when a sheet of paper is fed through the machine.

• Pressing the Clear key will clear the count.

• If the count is cleared mistakenly, press the Interrupt key, which will undo the clearing

10. Service Mode

Table of Contents