Applying The Sheet Document Press (Mfx-1330 Only) - Muratec MFX-1330 Field Engineering Manual

5.3.15 Applying the SHEET DOCUMENT PRESS (MFX-1330 only)

1) Open the Cover platen.
2) Peel the separator off the double-coated tape of the Sheet document press.
3) Place the Sheet document press, with the tape upward, on the Pane.
4) Make sure the press edge is 1 mm away from the document reference position of the Cover contact.
5) Close the Cover platen.
Cover contact A
Cover top
1mm
1mm
Sheet document press
5-85 5-85