Memory Switch Adjustment; Setting The Memory Switches; Clearing The Memory Switches - Muratec MFX-1330 Field Engineering Manual

3.3 Memory Switch Adjustment

3.3.1 Setting the Memory Switches

These switches are used to program internal machine parameters. The primary back up battery maintains
these settings if power are lost.
1. From standby, press MENU, *, 0, 1.
Set Memory Switch
2. Press ENTER.
3. Call up the desired switch by pressing
Select Memory Switch
00:00000000
4. Press ENTER.
01:01010000
00000011
Bit No. 76543210
5. To navigate through the memory switch settings:
• The bits are ranged from 7 (left) to 0 (right).
• Press
or
• Press 0 or 1 on the numeric keypad, or
• Press ENTER to save the setting of the displayed memory switch and return to the memory switch
edit screen.
• Press RESET not to save the setting of the displayed memory switch.
6. If you want to set other memory switches, repeat step 3-5. Otherwise, proceed to step 7.
7. Press RESET to return the machine to standby.
Note: You can confirm the initial setting of each Memory Switch by the Memory Switches List.
The memory switch List will be printed by pressing MENU, *, 1, 0.

3.3.2 Clearing the Memory Switches

Resets the memory switches to factory defaults.
1. From standby, press MENU, *, 0, 1,
Clear Memory Switch
2. Press ENTER.
Clear Memory Switch
Yes → Enter
3. Press ENTER. The memory switches will reset to factory defaults.
Note: To finish the operation without clearing the memory switches, press CANCEL.
4. Press RESET to return the machine to standby.
About the " " symbol at the list
The " " at the list indicates that you can set the switch respectively for the second phone line. See "3.24
Multi Line Settings" on page 3-118 for the setting.
/ /Enter
or , or by pressing the numeric keypad.
of the cursor key to move the cursor.
.
/ /Enter
or , to change the bit value.
3-48