Dram Clear; Clear Life Monitor - Muratec MFX-1330 Field Engineering Manual

3.16 DRAM Clear

Note: Perform a DRAM clear whenever a memory upgrade is installed to the unit or the DRAM is replaced.
1. Press MENU, *, 1, 6.
DRAM Clear
Yes → Enter
2. Press ENTER. The DRAM will be cleared.
Note: To finish the operation without performing initialization, press CANCEL.

3.17 Clear Life Monitor

The life monitor keeps a count of the pages scanned, printed, and transmitted, along with the drum
replacement count and total pages printed on the current drum. This mode clears these counters.
1. Press MENU, *, 1, 7.
Clear Life Monitor
Yes → Enter
2. Press ENTER. The counters will be reset.
Note: To finish the operation without performing initialization, press CANCEL.
3-113