Updating The Software Using The Pc - Muratec MFX-1330 Field Engineering Manual

3.28.3 Updating the software using the PC

Important: You cannot update the software in following situations:
· The machine is in transmission
· The machine is in scanning or in printing
· Data are stored in memory
In that case, wait until the transmission, scanning or printing ends, or the stored data is
transmitted, deleted or whatever and update the software.
1. Press MENU, *, 9, 8, ENTER. (The displayed LCD may differ according to the software version.)
1330 USA 041012
2. Connect your PC and the machine with USB cable. Click [Start] on the PC screen.
3.Launch the RomWrite application registered in the Startup menu.
4. Click [Browse] and designate the ROM data file.
3-131