Unique Switch Adjustment; Setting The Unique Switches; Clearing The Unique Switches - Muratec MFX-1330 Field Engineering Manual

3.7 Unique Switch Adjustment

3.7.1 Setting the Unique Switches

These switches are used to program internal machine parameters. The primary back up battery maintains
these settings if power is lost.
1. From standby, press Menu, *, 0, 4.
Set Uniq Switch
2. Press Enter.
3. Call up the desired switch by pressing
Select Uniq Switch
00:00000000
4. Press Enter.
00:00000000
00000000
5. To navigate through the unique switch settings:
• The bits are ranged from 7 (left) to 0 (right).
• Press
or
• Press 0 or 1 on the numeric keypad, or
• Press ENTER to save the setting of the displayed unique switch and return to the unique switch edit
screen.
• Press RESET not to save the setting of the displayed unique switch.
6. If you want to set other unique switches, repeat step 3-5. Otherwise, proceed to step 7.
7. Press Reset to return the machine to standby.

3.7.2 Clearing the Unique Switches

Resets the unique switches to factory defaults.
1. From standby, press Menu, *, 0, 4,
Clear Unique Switch
2. Press ENTER.
Clear Uniq Switch
Yes → Enter
3. Press ENTER. The unique switches will reset to factory defaults.
Note: To finish the operation without clearing the unique switches, press CANCEL.
4. Press RESET to return the machine to standby.
About the " " symbol at the list
The " " at the list indicates that you can set the switch respectively for the second phone line. See "3.24
Multi Line Settings" on page 3-118 for the setting.
/ /Enter
or , or by pressing the numeric keypad.
of the cursor key to move the cursor.
.
/ /Enter
or , to change the bit value.
3-74