Muratec MFX-1330 Field Engineering Manual page 150

1-12. The LCD now asks you to enter the type of dialing needed for the fax machine, either tone or pulse:
Note: This will appear only for USA version.
Phone Type
/ /Enter
1-13. Press or until the mode you want appears, then press ENTER to save the setting and continue.
1-14. The LCD now asks you to enter the fax number that will be displayed on other fax machines' displays
or printouts. The fax industry term for this number is Subscriber ID.
Your Fax Number
1-15. Use the numeric keypad to enter the fax number. The number may contain up to 20 characters
(numbers and dashes).
Note: If you make a mistake, press CANCEL to erase to the left.
To change just one number, press
number. Then re-enter the fax number correctly.
1-16. Press ENTER to save the number and continue.
1-17. The LCD now asks you to enter the name you want to appear at the top of faxes you send. You can
enter three TTIs. The name may be up to 22 characters in length.
TTI 1
1-18. Use the numeric keypad to enter characters.
1-19. Press ENTER to save the setting.
1-20. Repeat steps 1-17 to 1-19 to enter TTI2 and TTI 3 if necessary.
1-21. The LCD now asks you to select though the 3 entered TTIs the TTI used as usual.
Usual TTI
/ /Enter
1-22. Use or and select the TTI to be used usual and press ENTER to save the setting.
1-23. The LCD now asks you to enter the time for the energy save mode. Your machine will automatically
enter energy save mode after your selected idle time has elapsed.
Energy Save Timing
(001-240) 005 min.
1-24. Enter the time (in minutes) using
1-25. Press ENTER to save the setting and continue to step 2-1.
:Tone
to move left, or
;Upper
:TTI 1
or , or the numeric keypad.
to move right. Press CANCEL to erase the
3-122