Error Code - Muratec MFX-1330 Field Engineering Manual

8. Press MENU, *, 0, 9, ENTER, 0, 0, to confirm that the machine has the latest software.
NO.?
1330 USA
Note: The number differs according to the software version.

Error code

If the error occurred during writing, the following error code will be appeared:
E.02: Maker code read error
E.04: Sector erase error
E.05: Writing error
E.06: Sum check error
E.07: Time out error
When the above error occurred, turn off the power switch, confirm the cable connection, and then perform
from step 1 again.
041012
3-133