Clear Optional Data; Set Service Code - Muratec MFX-1330 Field Engineering Manual

3.18 Clear Optional Data

This mode clears all data and all activity journals for Printer controller and second phone line.
1. Press MENU, *, 1, 8.
Option Data Initial
Yes → Enter
2. Press ENTER. The optional data will be cleared.
Note: To finish the operation without performing initialization, press CANCEL.

3.19 Set Service Code

This is the code to protect the life monitor clear operation. If it is not necessary to protect to the life monitor
clear operation, abort this operation without entering the service code.
1. Press MENU, *, 1, 9.
Set Service Code
Old Passcode
2. Your next mode depends on whether you're creating or modifying the service code:
• If creating --- Use the numeric keypad to enter 0000 and press ENTER.
• If modifying --- Use the numeric keypad to enter the proper service code and press ENTER. If you
enter an invalid code, the fax will reject the attempt and abort this operation.
3. Use the numeric keypad to enter the four-digit service code.
Set Service Code
New Passcode
4. Press ENTER.
Note: To turn off the service code and return to normal life monitor clear (not protected), change the code to
0000 by repeating steps 1-4 and entering 0000 in step 3.
:****
:1234
3-114