Muratec MFX-1330 Field Engineering Manual page 152

3-7. Press ENTER to save the customer's name and continue. The LCD will show:
Address 1 ;Upper
Enter the customer's address for the upper row. The customer's address may be up to 30 characters in
length.
3-8. Press ENTER to save the customer's address and continue. The LCD will show:
Address2 ;Upper
Enter the customer's address for the Lower row. The customer's address may be up to 30 characters in
length.
3-9. Press ENTER to save the customer's address. The LCD will show:
Cust Tel
Enter the customer's phone number. The phone number may be up to 20 characters in length.
3-10. Press ENTER to save the customer's phone number and continue. The LCD will show:
Unit.Serial;Upper
Enter the fax machine's serial number. The number may be up to 18 characters in length.
3-11. Press ENTER to save the fax machine's serial number and continue. The LCD will show:
Order Sheet:Off
/ /Enter
Select "Off", "Transmit", or "Print". In case of "Transmit", when it is confirmed that the order sheet has
been sent to the set destination, the "Supply Notification Report" will be printed for user's confirmation.
3-12. Press ENTER to save the setting.
Note: Press RESET to go back to the standby mode.
3-14. Press ENTER to save the setting and continue to step 4-1.
Clear the consumable order sheet settings
4-1. To clear the consumable order sheet, select "Reset Order Sheet" using the cursor key in step 2-1.
Reset Order Sheet
/ /Enter
4-2. Press ENTER.
4-3. To clear the information of consumable order sheet, press ENTER.
To finish the operation without clearing, press CANCEL.
Reset Order Sheet
Yes → Enter
3-124