Muratec MFX-1330 Field Engineering Manual page 181

What you see on the LCD
Too Many Locations
Too Many Steps
Unable to Reduce
Unable to Sort
Start/Stop
Use FBS Glass
What it means/What to do
You tried to enter too many numbers for a broadcast. You can enter up to
200 autodialer numbers and up to 30 numbers entered through the numeric
keypad.
Press CANCEL to delete the extra numbers and then try again.
You tried to enter too many steps for a macro. You can enter up to 60 steps
into a macro key.
In the reduction copy using the ADF, if the calculated ratio is smaller than
minimum reduction ratio (50%), this message will appear and you cannot
make the reduction copy.
Use the Document glass, however parts of the image might not be copied.
In PC printing, the data is too large to sorting.
Press the machine makes a print without collation. Press
START
current PC printing job will be cancelled.
You tried to enlargement copy using the ADF. Your machine cannot
enlargement copy from the ADF.
Please set your document on the Document glass to make the enlargement
copy.
4-19
the
STOP