Muratec MFX-1330 Field Engineering Manual page 43

Machine Parameter 108
Initial
Switch
Setting
7 0 Printer registration
adjustment (Horizontal) for
6 0
duplex printing cassette.
5 0
4 0
Adjusts the start point to
3 0
print.
2 1
1 1
The plus setting increases
0 1
the left margin and the minus
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
Machine Parameter 109 and 139 --- Factory use only
Machine Parameter 140
Initial
Switch
Setting
7 0 Printer registration
adjustment.
6 0
5 0
Adjusts the left margin at the
4 0
1st cassette for printing.
3 0
2 0
The plus setting increases
1 0
the left margin and the minus
0 0
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
Machine Parameter 141
Initial
Switch
Setting
7 0 Printer registration
adjustment.
6 0
5 0
Adjusts the left margin at the
4 0
2nd cassette for printing.
3 0
2 0
The plus setting increases
1 0
the left margin and the minus
0 0
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
Adjust
See table on page 3-18.
Note: Set this switch after setting the margin to
"0 mm" in Unique Switch 52. Then, after setting
this switch, set the margin to the initial setting (4
mm) in Unique Switch 52.
Adjust
See table on page 3-18.
Note: The surrounding margin (right / left / top /
bottom) is set in Unique Switch 52. If you want to
adjust only left margin, adjust it in this switch.
Adjust
See table on page 3-18.
Note: The surrounding margin (right / left / top /
bottom) is set in Unique Switch 52. If you want to
adjust only left margin, adjust it in this switch.
3-15
Usage/Comments
Usage/Comments
Usage/Comments