Muratec MFX-1330 Field Engineering Manual page 42

Machine Parameter 100
Initial
Switch
Setting
7 0 Printer registration
adjustment (Horizontal) at
6 0
the 1st cassette for printing.
5 0
4 0
Adjusts the start point to
3 0
print.
2 0
1 0
The plus setting increases
0 0
the left margin and the minus
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
Machine Parameter 101
Initial
Switch
Setting
7 0 Printer registration
adjustment (Horizontal) at
6 0
the 2nd cassette for printing.
5 0
4 0
Adjusts the start point to
3 0
print.
2 0
1 0
The plus setting increases
0 0
the left margin and the minus
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
Machine Parameter 102 ∼ 106 --- Factory use only
Machine Parameter 107
Initial
Switch
Setting
7 1 Printer registration
adjustment (Horizontal) at
6 1
the Bypass tray for printing.
5 1
4 1
Adjusts the start point to
3 1
print.
2 0
1 0
The plus setting increases
0 1
the left margin and the minus
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
Adjust
See table on page 3-18.
Note: Set this switch after setting the margin to
"0 mm" in Unique Switch 52. Then, after setting
this switch, set the margin to the initial setting (4
mm) in Unique Switch 52.
Adjust
See table on page 3-18.
Note: Set this switch after setting the margin to
"0 mm" in Unique Switch 52. Then, after setting
this switch, set the margin to the initial setting (4
mm) in Unique Switch 52.
Adjust
See table on page 3-18.
Note: Set this switch after setting the margin to
"0 mm" in Unique Switch 52. Then, after setting
this switch, set the margin to the initial setting (4
mm) in Unique Switch 52.
3-14
Usage/Comments
Usage/Comments
Usage/Comments