Muratec MFX-1330 Field Engineering Manual page 120

Unique Switch 72 - Operation
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 1 Factory use only
4 0 Factory use only
3 1 Effect charge setting in
department mode
0: No
1: Yes
2 0 Send service report
1: No
2: Yes
1 0 Factory use only
Transmit the consumables
order sheet automatically
0: No
1: Yes
0 0
Unique Switch 73 - Operation
Initial
Switch
Setting
7 0 Print consumable order sheet
0: No
1: Yes
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 1 Factory use only
2 0 Factory use only
1 1 Factory use only
0 0 Factory use only
Adjust
When this bit is set to "1", the following available:
Input the price rate per page for transmission
Print transmission charge on the department list
When both Unique Switch bit 8 and this bit set to
"1", the machine automatically transmit the
consumables order sheet to the registered
distributor's office.
It does not print the consumable order sheet.
Note: For this feature to work correctly, you must
register several items. See "3.15 Consumable order
sheet'" page 3-110.
Adjust
If this switch is set to "1", the machine will print the
consumable order sheet automatically when the
drum cartridge is near end of its design life or the
toner cartridge is near empty.
Note: For this feature to work correctly, you must
register several items. See "3.15 Consumable order
sheet'" page 3-110.
3-92
Usage/Comments
Usage/Comments