Muratec MFX-1330 Field Engineering Manual page 154

Service report settings
6-1. Select "Set RDS" in step 2-1, and then press ENTER. The following display will appear.
Send SvcReport
/ /Enter
6-2. Press or to select "On" or "Off" and activate/deactivate service report setting. Then press ENTER.
Note: When you have selected "Off", the machine will return to step 2-1.
6-3. When you selected "On", the LCD will show:
Location1
/ /Enter
Two fax numbers can be set as Service report sending destination ("Location 1" and "Location 2"). Enter
the settings for "Location 1" described through Step 4 to 6, and then enter settings for "Location 2"
6-4. Select "On" of "Off", then press ENTER.
Location1 Fax Number
1-800-347-7438
When ""On" is selected, the fax number enter screen will appear. The number of Muratec Customer
Support Number is entered as initial, however you can overwrite it with another number.
6-5. Press ENTER to save the fax number.
6-6. The LCD shows:
Report Format:Simple
/ /Enter
Press or to select the Report format from "Simple" or "Detail" and press ENTER.
6-7. The LCD shows:
Period :Interval
/ /Enter
Press or to select the Report format form "Interval" or "Monthly" and press ENTER.
To send the report at some definite interval, select "Interval".
To send the report on a designated time once a month, select "Monthly".
• When you select "Interval", proceed to step 6-8-1.
• When you select "Monthly", proceed to step 6-8-2.
6-8-1. You can set the interval for service report auto transmission from 1 to 12 months.
Enter Time
(01-12) 03 months
The default setting is 3 months. Enter the desired number (01 to 12) using the numeric keypad, and press
ENTER.
6-8-2. Enter the day and time in 24-hour format when to send the report, and press ENTER.
Monthly
For instance, to send the report every 5th day of the month at 2 pm, press 0 5 1 4 0 0.
6-9. Press RESET to go back to the stand by mode.
:Off
:Off
01,00:00
3-126