Muratec MFX-1330 Field Engineering Manual page 121

Unique Switch 74 - Operation
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Prohibit double registration
0: No
1: Yes
2 1 Priority of consumable order
sheet printing
0: Print after the current
printing job completed
1: Print immediately
1 0 Print the transmission time
on TCR
0: Print the transmit time
1: Blank
0 1 When receive a fax message
during Auto power off mode,
the LCD will be in standby
mode
0: No
1: Yes
Unique Switch 75 ∼ 76 --- Factory use only
Unique Switch 77 - Operation
Initial
Switch
Setting
7 0 Countdown display
0: No
1: Yes
6 1 Factory use only
5 1 Select paper with the same
width to the received
document
0: No
1: Yes
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 1 Factory use only
0 1 Factory use only
Adjust
When set to "0", the same phone number can be
registered in two or more one-touch keys or speed
dial numbers.
When the drum cartridge has reached its design
life, or the toner cartridge is empty, the machine
prints a consumable order sheet (see unique switch
073).
When this switch is set at "0", the machine not print
consumable order sheet until the current printing
job is finished.
When set to "0", the transmission time will be
printed on TCR.
Adjust
Determine if the machine displays the remaining
pages which can be printed after the machine
detects the "Toner low" or "Drum near end".
Note: It will count down the number of sheets,
When this bit is set to "1", the received document
will be printed on the same width paper to the
document. When it is set to "0", a paper that will
have fewer margins will be selected.
3-93
Usage/Comments
Usage/Comments
which can be printed.