Muratec MFX-1330 Field Engineering Manual page 123

Unique Switch 85 - Miscellaneous
Initial
Switch
Setting
7 0 Factory use only
6 0 Print/Send the consumable
order sheet when the drum is
near end
0: Yes
1: No
5 0 Print/Send the consumable
order sheet when toner is
near empty
0: Yes
1: No
4 0 Factory use only
3 0 "Next doc" default setting
when scanning with ADF
0: No
1: Yes
2 1 "Next doc" default setting
when scanning with FBS
0: No
1: Yes
1 0 Factory use only
0 0 Factory use only
Unique Switch 86 --- Factory use only
Unique Switch 87 - Miscellaneous
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Print the sending document
on the error massage sheet
0: No
1: Yes
1 0 Factory use only
0 0 Factory use only
Unique Switch 88 ∼ 95 --- Factory use only
Adjust
When both bit 0 of Unique SW 72 and 7 of Unique
SW 73 is set to "1", the setting will be reflected to
this switch.
Note: For this feature to work correctly, you must
register several items. See "3.15 Consumable
order sheet" page 3-110.
When both bit 0 of Unique SW 72 and 7 of Unique
SW 73 is set to "1", the setting will be reflected to
this switch.Note: For this feature to work correctly,
you must register several items. See "3.15
Consumable order sheet" page 3-110.
Determine the default setting for "Next doc"
scanning with ADF.
If it is set to "0" the default setting for Next doc is
"No", if is "1" the setting is "Yes".
Determine the default setting for "Next doc"
scanning with FBS.
If it is set to "0" the default setting for Next doc is
"No", if is "1" the setting is "Yes".
Adjust
3-95
Usage/Comments
Usage/Comments