Muratec MFX-1330 Field Engineering Manual page 179

What you see on the LCD
No Command Stored
No Department Code
No Document Stored
No Drum
No Number Stored
No Passcode
No PIN Number
No Report
No Toner Cartridge
Not Allowed in Macro
Other Key Setting
Open 1st Side Cover
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open&Close ScanCover
Reset Document
Paper Mismatch
Set XXX paper
Press Stop
Paper Mismatch
Rotate the paper
Press Stop
Please Call Service
XXX
Please Supply Paper
What it means/What to do
You pressed REVIEW COMMANDS to review upcoming commands, but
your fax machine had none stored.
You tried to turn on the department code setting but there are no department
codes stored in your fax machine.
Store at least one department code, then try again.
. . . or . . .
You entered incorrect department code at fax sending while the department
feature is on.
Enter correct department code.
You tried to print a document from memory, but your fax machine had none
stored.
The drum cartridge is missing or has not been properly installed in your fax
machine.
Please properly install the drum cartridge.
You selected an autodialer, batch box or F-Code box number for which there
is no fax (or phone) number programmed.
Either choose another number or dial a phone number directly from the
numeric keypad.
You tried to program a security feature, but there's no protection passcode
stored in your fax machine.
Store a protection passcode in your machine, then retry again.
You selected "Mode1" in the pin mask feature and tried to call an autodialer
number in which no PIN has been entered, or to call using numeric keypad
without PIN.
Enter a PIN, then try again.
You requested an activity journal or confirmation report, but your fax
machine has no record of any fax jobs having occurred.
The toner cartridge is missing or has not been properly installed in
your fax machine. Please properly install the toner cartridge.
During macro registration, you pressed the key which cannot be registered
in Macro, such as MONITOR/CALL key or SECURITY RECEPTION key.
You tried to enter the same function which is already stored in other Soft
key.
Store the different function.
The paper is jammed in your fax machine.
Open the cover indicated on the LCD, and remove the jammed paper
carefully.
Either your document wasn't inserted correctly, or the fax to which you're
sending can't handle the document's page length.
Reset the page and try again.
In PC printing, the size of paper in the paper cassette is not match up the
paper size you specified by printer driver. Press
Then set the correct size of paper and try printing again.
In PC printing, the direction of the A5-sized paper on the bypass tray is
wrong.A5 is not available for PC printing.
Set the A5 on the bypass tray.
The printer unit of your fax machine has become inoperable.
See page 4-21.
The paper cassette or bypass tray is out of paper.
Supply paper to the cassette and/or the bypass tray.
4-17
to cancel a print job.
STOP