Lcd Test; Key Panel Test - Muratec MFX-1330 Field Engineering Manual

3.12.3 LCD Test

This mode displays two test patterns in LCD.
1. Press MENU, *, 1, 1,
LCD Test
Pressing START, all dots turn on.
Next pressing START, all dots turn off.
Finally pressing START, the alphabetical characters are shown on the LCD.
ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmn
2. Press STOP to exit the test mode.

3.12.4 Key Panel Test

1. Press MENU, *, 1, 1,
Key Panel Test
2. As each button on the keypad is pressed, a representative name as show in the following table will be
displayed.
Key
COPY/FAX/SCAN
MACRO PROGRAM
Macro keys M1 to
M7
One-touch keys 01
through 40
PAPER SIZE/NEXT
DOC.
DOC. SIZE
DOC. RESOLUTION
CONTRAST
MENU
3. Press STOP twice to cancel the key panel test.
twice, then press ENTER.
three times. Then press ENTER.
Indication in LCD
COPY/FAX
Macro Program
M1 throughM7
[01] through [40]
Paper size/Next Doc
Doc. Size
Document/Resolution
Contrast
Menu
Key
ENTER
CANCEL
SORT
BYPASS
COMBINE
ADVANCED
FUNDTIONS
SPEED DIAL/
GROUP
JOB CONFIRM.
Numeric keys 0
through #
RESET
START
STOP
3-103
Indication in LCD
Enter
Cancel
Soft Key 1
Soft Key 2
Soft Key 3
Advanced Functions
Speed Dial/Group
Job.Confirm
0 through #
Reset
Start
Stop