Roller Press - Muratec MFX-1330 Field Engineering Manual

ROLLER PRESS

1) Open the Cover jam access.
2) Remove the Printer fuser. (See page 5-52)
3) Remove two Frame fuser outer mounting screws, and then remove the Frame fuser outer.
4) Release the Knob fuser F and B.
Knob fuser F
5) Remove the ROLLER PRESS.
NOTE: When reattaching the Frame fuser outer, be sure that Plate earth B touches the Roller press.
Frame fuser inner
Roller press
5-55 5-55
Frame fuser outer
Plate earth B
Knob fuser B