Clear Service Report - Muratec MFX-1330 Field Engineering Manual

When "On" is selected, the fax number enter screen will appear. The number of Muratec Customer Support
Number is entered as initial, however you can overwrite it with another number.
6. Press ENTER to save the fax number.
7. The LCD shows:
Report Format:Simple
/ /Enter
Press or to select the Report format from "Simple" or "Detail" and press ENTER.
8. The LCD shows:
Period :Interval
/ /Enter
Press or to select the sending period from "Interval" or "Monthly" and press ENTER.
To send the report at some definite interval, select "Interval".
To send the report on a designated time once a month, select "Monthly".
• When you select "Interval", proceed to step 9-1.
• When you select "Monthly", proceed to step 9-2.
9-1. You can set the interval for service report auto transmission from 1 to 12 months.
Enter Time
(01-12) 03 months
The default setting is 3 months. Enter the desired number (01 to 12) using the numeric keypad, and press
ENTER.
9-2. Enter the day and time in 24-hour format when to send the report, and press ENTER.
Monthly
For instance, to send the report every 5th day of the month at 2 pm, press 0 5 1 4 0 0.
10. Press RESET to go back to the stand by mode.

3.27.2 Clear service report

To clear the information of service report:
1. Press MENU, *, 4, 2,
Clear RDS
/ /Enter
2. Press ENTER.
3. To clear the information of service report setting, press ENTER.
To finish the operation without clearing, press CANCEL.
Clear RDS
Yes → Enter
01,00:00
.
3-120