Frame Drive Gears - Muratec MFX-1330 Field Engineering Manual

FRAME DRIVE GEARS

1) Remove the Cover option.
2) Remove the Cover shield.
3) Remove the Cover back.
4) Remove three Ground wires.
5) Remove five Frame drive mounting screws, and then pull out the Frame drive.
6) Remove the harness from two clamps, and disconnect the connector on RX motor.
7) Remove the FRAME DRIVE.
Ground wire
8) [1] Remove the Gear 73H/27H.
9) [2] Remove the Gear 54H/28H.
10) [3] Remove the Gear 61H.
( See page 5-20)
H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H
( See page 5-20)
H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H
( See page 5-32)
H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H
Clamp
Ground wire
[3] Gear 61H
5-45 5-45
Frame drive
Frame drive
[1] Gear 73H/23H
[2] Gear 54H/28H