Muratec MFX-1330 Field Engineering Manual page 87

Memory Switch 33 - Modem
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 Delete receive echo of CFR
at the receiver side
0: No
1: Yes
0 0 Expand FSK receive time
after detecting flag
0: 3.3 seconds
1: 10 seconds
Memory Switch 34 ∼ 39 --- Factory use only
Adjust
Modem will be opened only in high-speed mode.
Sets this switch to "1" to resolve the problem
caused of the echo of CFR.
Setting this switch to "1" extend HDLC frame
receive timer in FSK from 3.3 seconds to 10
seconds after detecting pre-amble.
3-59
Usage/Comments