Print Service Report; Print Program Mode List; Test Modes - Muratec MFX-1600 Field Engineering Manual

3. The kind of printer error will be displayed. If happens two or more troubles, the number of troubles is
displayed on the right upper of the LCD. For example, when "Heater error" and "Drum Fuse Error" has
occurred, the LCD shows 2.
Service Call
Heater Error
4. Press to show the other printer error.
5. Press STOP to exit this mode.
Note:
See page 4-21 for the printer error messages and an explanation of each are outlined.

3.9 Print Service Report

This mode causes the machine to print a several status of the machine. To print the program mode list
press Program key, *, 7. After printing the unit will return to standby.
Service Report
** Printing **

3.10 Print Program Mode List

This mode causes the unit to print a summary list of the unit's programming modes. To print the program
mode list press Program key, *, 8. After printing the unit will return to standby.
Program List
** Printing **

3.11 Test Modes

This mode offers the ability to print a test pattern and monitor certain unit output functions. Included are
followings.
1. Press Program key, *, 9 to enter the test mode.
Press to scroll through the test modes.
Life Monitor
Printer Test
Feeder Test
BackgroundLevel Test
Set Background Level
2. Press ENTER to entry the desired test mode.
:2 How many troubles
/ /Enter
/ /Enter
/ /Enter
/ /Enter
/ /Enter
3-62