Attaching Your Telephone Or Answering Machine; Attaching An Optional Handset - Muratec F-160 Operating Instructions Manual

Plain-paper fax machines
Hide thumbs Also See for F-160:
Table of Contents

Advertisement

2
Adjust the volume as needed:
To turn the volume up, press /
The display, or
, indicates the volume. The possible settings are:
LCD
**
Tel Mode
**
Volume:
**
Tel Mode
**
Volume:
**
Tel Mode
**
Volume:
**
Tel Mode
**
Volume:
3
Press
/
again to hang up and save the setting that appears.
MONITOR
CALL

Attaching your telephone or answering machine

It's easy to attach a telephone or answering machine to your fax machine.
If you do this, only your fax machine connects to the phone outlet in the wall. The
other device receives phone signals through your fax machine.
To attach a telephone or answering machine:
1
If your telephone or answering machine is already plugged into a phone jack
in the wall, disconnect it from that jack. Hold onto the phone plug; you'll need
it in step 2.
2
Plug the line you disconnected from
the wall jack in Step 1 into the
.
jack on the back of your
EXT
TEL
fax machine.
3
If you attach an answering machine
to your fax machine, set the
answering machine to answer calls
after no more than two rings. (If necessary, consult your answering
machine's instructions.)
For information on how to use either an answering machine or a telephone with your
fax machine, see "Receiving faxes," beginning on page 1.18.
. To turn the volume down, press .
PROGRAM
= Loudest setting.
= Medium setting.
= Low setting.
= Volume off.

Attaching an optional handset

To attach the optional handset:
1
Use the screws included with the handset and a small Phillips-head
screwdriver to attach the handset cradle to the side of your fax machine.
2
Plug one end of the curled handset cord into the
jack on the back of the fax machine.
HANDSET
3
Plug the other end of the curled handset cord into the jack on the handset. If
connected to a phone line, your fax machine is now "off-hook," and you can
hear a dial tone.
4
Place the telephone handset onto its cradle. The cradle will press the
handset's small "flash" button, hanging it up.
Note: You can also press the "flash" button manually to hang up the call
when holding the handset.
Important: Do not connect the handset directly to a telephone wall jack. Connect
the handset only to your fax machine.
Installation complete!
Now, see how our EasyStart feature will have
you up and running within minutes.
Getting started
LINE
EXT.TEL HANDSET
1.9

Advertisement

Table of Contents
loading

Table of Contents