Ntp Settings In Windows Server 2008 R2; Specifying An Ntp Server; Figure E.17 [Date And Time] Window (1) - Fujitsu PRIMEQUEST 2000 Series Installation Manual

Appendix E Setting up the NTP Server (Windows)
E.3 NTP Settings in Windows Server 2008 R2
E.3 NTP Settings in Windows Server 2008 R2
The procedures in this chapter require Administrator privileges.
All screenshots are display examples, and the actually displayed contents vary depending on the system
configuration and other factors.
E.3.1 Specifying an NTP Server
1. Select [Control Panel] - [Set the time and date]. The [Date and Time] dialog box appears.

FIGURE E.17 [Date and Time] window (1)

137
CA92344-0536-04