Installing A Server Node To The Server Enclosure - Fujitsu PRIMERGY CX270 S1 Operating Manual

5.2 Installing a server node to the server
enclosure
V
CAUTION!
Follow the safety instructions in the chapter
●
on page
I
All nodes are hot pluggable. Therefore, shutting down the multi-node
server system is not necessary.
Figure 2: Removing the server node dummy module
Ê Remove two one upon each other installed server node dummy modules.
Ê Undo the locking mechanism (1) and pull the server node dummy module
out of the bay (2) of the server enclosure.
CX270 S1
23.
Operating Manual
Hardware installation
"Important information"
37