Making Various Settings After Installation - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

2. Execute the downloaded file by double-clicking it.
The prompt screen for the cmd.exe (a window with the black background) is displayed for a while, and then
the file is extracted.
3. After the extraction is completed, the window is automatically closed.
The downloaded file is extracted and folders or files are newly created.
Remarks
If the window is not closed in spite of the display of "Installation Completed" in the window, click the
[Finish] button to close the window.
4. Double-click storportminiportkit_XXXXX.exe in the extracted FC_vXXXXXX directory to run it.
Remarks
"XXXXX" represents the version and must be replaced with a suitable character string.
5. This completes the installation procedure for a single path configuration. Proceed to 4.3 Changing and
Checking the Setting of Detailed FC Card Information. To use the built-in HDD, shut down the system and
then add the HDD.
For a multipath configuration, proceed to step 6 in 4.2.7 For a multipath configuration.

4.2.5 Making various settings after installation

Make various settings by referring to CHAPTER 5 Work after Operating System Installation (PRIMEQUEST
1800E2) or CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) in the
PRIMEQUEST 1000 Series Installation Manual (C122-E107EN).
122