Figure 1.63 [Snmp Community] Window; Table 1.100 Setting And Display Items In The [Snmp Community] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations

FIGURE 1.63 [SNMP Community] window

TABLE 1.100 Setting and display items in the [SNMP Community] window

Item
System Name Displays the SNMP system name.
System Location Sets the System Location of SNMP.
You can use alphanumeric characters, spaces, and the following characters:
! " # $ % & ' ( ) = - ^ ~ \ @ ` [ ] { } : ; * + ? < > . , / _ |
However, the following restrictions apply:
System Contact Sets the System Contact for SNMP.
The characters that can be specified for System Contact are the same as those for [System
Location].
Community/User Sets the SNMP Community string for SNMP v1 and v2.
Alternatively, it sets the user name for SNMP v3.
You can use alphanumeric characters and the following characters:
! " # $ % & '( ) * + , - . / @ [ ] ^_ ` { | } ~
However, the character string cannot begin with " (double quotation mark), # (number
sign), ' (single quotation mark), or ` (back quotation mark).
IP Address/MASK
- The character string cannot begin with a space or #.
- The character string cannot end with a space.
- To specify an IP address: Enter the IP address.
- To specify a subnet: Enter the subnet and mask.
178
Description
C122-E110-10EN