Table of Contents
Advertisement
Back Panel
MS350 Series back panel
Factory Reset Button
If the button is pressed and held for at least five seconds and then released, the switch will reboot and be restored to its original factory settings by deleting all
configuration information stored on the unit.
Ports and Status Indicators
The MS uses LEDs to inform the user of the device's status. When the device powers on, all the Internet LEDs flash twice. Additional functions are described
below, from left to right.
Front Panel Components
Item
Function
1
Power
2
Switch Ports
Back Panel Components
LED Status
Meaning
Solid orange
Switch is unable to connect to the Meraki cloud
Flashing white
Firmware upgrade in process
Solid white
Switch is fully operational and connected to the Meraki cloud
Off
Switch does not have power
Off
No client connected
Solid orange
10/100 Mbps (1 Gbps on SFP+)
Solid green
1/2.5/5/10 Gbps (10 Gbps on SFP+)
3
Advertisement
Table of Contents
