Redundancy Reload - Cisco WLC 5700 Series Command Reference Manual

redundancy reload

redundancy reload
To force a reload of one or all of the switches in the stack, use the redundancy reload command in privileged
EXEC mode.
redundancy reload {peer| shelf}
Syntax Description
peer
shelf
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.2SE
Usage Guidelines
Before using this command, see the "Performing a Software Upgrade" section of the Stack Manager
Configuration Guide (Platform—Cisco WLC 5700 Series) for additional information.
Use the redundancy reload shelf command to reboot all the switches in the stack.
Examples This example shows how to manually reload all switches in the stack:
Controller# redundancy reload shelf
Controller#
High Availability Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
20
Reloads the peer unit.
Reboots all switches in the stack.
Modification
This command was introduced.
High Availability Commands
OL-32317-01