Ip Interface Information; Table 4-13 List Of Initial Values That Can Be Set Using Tunnel Information And Initial Values During Initial Installation - Hitachi GR2000 Series Configuration Commands

Table 4-13 List of Initial Values That Can Be Set Using Tunnel Information and Initial
Information
Group Name
Tunnel
information
4.7.14

IP Interface Information

Input Format
Parameters
The default value items that can be set using IP Information and the default values
during initial installation are shown in Table 4-14. For details of each parameter,
refer to the configuration definition information in "GR2000 Configuration
Commands, (universal CLI) Vol. 1."
GR2K-GA-0014
Ver. 07-02
Values During Initial Installation
Information Name
Optimizing option of tunnel relay performance
Tunnel interface MTU size
Relay limit count during encapsulation
Operation Management Information
Initial Value
off: -tunnel_optimize_off
1280 octets
30
4-51