Table 1-63 Igmp Type Number - Hitachi GR2000 Series Configuration Commands

Description:
Default:
Range of value:
Description:
Default:
Range of value:

Table 1-63 IGMP Type Number

IGMP Type No. (h)
0x11
0x12
0x13
0x16
0x17
0x22
Description:
Default:
Range of value:
Description:
Default:
Range of value:
GR2K-GA-0014
Ver. 07-02
Specifies the ICMP code number in decimal.
Undefined
0–255
Specifies the IGMP type number in decimal. When specifying
this parameter, define 2 (IGMP) to -protocol. If -protocol is
undefined or defined other than 2 (IGMP), this parameter
becomes invalid.
Undefined (Does not include IGMP type to the -filter condition.)
0–255
Input Value (Decimal)
17
18
19
22
23
34
Specifies the connection branch index number (specified by
the DLCI-group information or VC-group information) in
decimal. When a packet that matches the filter condition is
relayed, the DLCI/VC specified in the group is selected and
transmitted. Select the filter list information that sets the
connection branch index number as a transmitter's filter
condition by means of
filter-interface
Undefined
0–7
Enables the policy routing function by specifying the
destination interface name (same as the line name set by the
object) and the next hop IP address. The policy routing
ip
function causes the local device to relay a received packet to
its destination if it matches the filter condition. Select the filter
list information that sets the policy routing as a receiver's filter
condition by means of
filter-interface
No policy routing
Interface name: One of the line names set by the
Name
Membership Query
Version 1 Membership Report
DVMRP protocol
Version 2 Membership Report
Version 2 Leave Group
Version 3 Membership Report
(outbound) parameter of the
-out
object.
(inbound) parameter of the
–in
object.
Filtering/QoS Information
object.
ip
1-119