Hitachi GR2000 Series Configuration Commands page 352

Hitachi gigabit router configuration guide
Hide thumbs Also See for GR2000 Series:
Table of Contents

Advertisement

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Description:
Description:
Default:
Range of Value:
Description:
Default:
Range of Value:
Description:
Default:
Range of Value:
Description:
Default:
Description:
Default:
Range of Value:
Description:
Description:
Default:
Range of Value:
4-22
This set of parameters specifies transmission of the NTP
packet in broadcast or multicast connection. The NTP packet
transmission in multicast connection is supported in version
02-01 or above.
Specifies the broadcast or multicast IP address
Undefined (mandatory input)
IP address in dot notation
Specifies the authentication key number. The key number
must be the one defined by the
parameter.
No authentication key
1–4294967295 in decimal
Specifies the NTP version
3
1, 2, or 3
Specifies receipt of an ntp broadcast message sent from the
time server connected on the subnet.
No receipt
Specifies the authentication key number. The key number
must be the one defined by the
parameter.
No authentication key
(<key>): 1–4294967295 in decimal
This set of parameters specifies the address used in limiting
access to the local NTP server.
Specifies the access-limiting address or the subnet address.
Undefined (mandatory input).
IP address in dot notation.
authentication-key
authentication-key
GR2K-GA-0014
Ver. 07-02

Advertisement

Table of Contents
loading

Table of Contents