Hitachi GR2000 Series Configuration Commands page 89

Range of value:
This parameter specifies the DSCP value that is the upper six bits of a Traffic
class field. The DSCP value is compared with the upper six bits of a Traffic class
field in a receive packet. The lower two bits of a TOS field are ignored.
7
2
High-order 6 bits are designated.
DSCP(Differentiated Services Code Point), CU(Current Unused)
Default:
Range of value:
7
2
High-order 6 bits are designated.
DSCP(Differentiated Services Code Point), CU(Current Unused)
Default:
Range of value:
Description:
Default:
Range of value:
GR2K-GA-0014
Ver. 07-02
IPv6 address
(nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn):
0:0:0:0:0:0:0-ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Sub-net mask length (aaa): 0-128
6 5 4 3
2 2 2 2
DSCP
None (DSCP values are not included in the flow detecting
condition.)
0 to 63 (decimal).
This parameter specifies precedence value, which is the upper
3 bits of the ToS field. This is compared to the upper 3 bits of
the ToS field of sent/received packets. The lower 5 bits of the
ToS field are ignored.
6 5 4 3
2 2 2 2
DSCP
None (precedence values are not included in the detecting
condition)
0 - 7 (decimal)
Upper limit or lower limit of the IP user data length are
designated.
-upper:Upper limit of the IP user data length is designated.
-lower:Lower limit of the IP user data length is designated.
None (TOS values are not included in the flow detecting
condition.)
0 to 65535 (decimal).
2 1 0
2 2 2
CU
2 1 0
2 2 2
CU
Filtering/QoS Information
1-47