Table 1-82 Configurable Parameters For Flow Detection By Upper-Level Protocol - Hitachi GR2000 Series Configuration Commands

Displaying the first free entry No.
TCP, UDP, and other upper level protocols specify the configurable parameters for
flow detection, whereas the flow control parameters that can be configured depend
on the type of flow-control process used. The following tables illustrate the
configurable parameters for flow detection that are supported by various upper-level
protocols, and the flow-control parameters that are supported by different
flow-control methods. IP QoS settings are generated by selecting one parameter type
from the flow-detection parameter table (see Table 1-82) and one from the
flow-control type parameter table (see Table 1-83 to create one entry.

Table 1-82 Configurable Parameters for Flow Detection by Upper-level Protocol

Flow-Detection Parameter
<IP List No.>
-protocol <No.>
{-payload_length_upper_limit |
-payload_length_lower_limit}
<Payload Length>
-tos <Value>
{-ip_pair | -ip_pair_off}
-ip_source <IP Address> -<IP Address> | mask
<Subnet Mask> | masklen <Subnet Mask Bit Length> |
/<Subnet Mask Bit Lendth>]
-ip_destination <IP Address> -<IP Address> | mask
<Subnet Mask> | masklen <Subnet Mask Bit Length> |
/<Subnet Mask Bit Lendth>]
{-port_pair | -port_pair_off}
-port_source <Port No.> [-<Port No.>]
-port_destination <Port No.> [-<Port No.>]
{-pair_synchronized_off | -pair_synchronized}
-icmp_type <No.>
-icmp_code <No.>
-igmp_type <No.>
††: required, †: configurable,
GR2K-GA-0014
Ver. 07-02
*: configurable; default, blank:
Upper-Level Protocol
TCP UDP ICMP
†† †† ††
6 17 1
† † †
† † †
* * *
† † †
† † †
* *
† †
† †
* *
†
†
not configurable, numeral:
Filtering/QoS Information
IGMP Unspecified
†† ††
2
† †
† †
* *
† †
† †
†
numeric setting
Other
††
†
†
†
*
†
†
1-169