Hitachi GR2000 Series Configuration Commands page 480

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Table 5-11 IPX Information Error Messages (continued)
Duplicate snap network address, snap
network address.
Hops not specified.
Interface name not specified.
Invalid name <name>.
IPX interface already defined.
IPX not specified.
Maximum number of IPX network addresses
are already defined on the RP.
Maximum number of IPX network addresses
are already defined.
Next hop host not specified.
Network address not specified.
Network not specified.
Next hop network not specified.
Next hop router address not specified.
No such insert index.
No such set index.
Node address not specified.
Protocol type not specified.
Server name not specified.
Socket not specified.
Ticks not specified.
Type not specified.
5-90
Snap network address and snap network address are identical.
Specify each snap network address and snap network address
unique.
There is no setting of HOPS. Specify HOPS.
Specified interface name not found. Enter a correct interface name.
Entered name of configuration information invalid.
For IPX arp: Specify name set in dlci, vc and isdn ppp.
A name of <name> configuration information.
Attempt to specify IPX interface in already defined. Specify correct
interface
There is no setting of IPX. Specify IPX configuration.
is already specification of valid number for IPX network per RP.
Specify 32 addresses or less per RP.
There is already specification of valid number for IPX network per
router. Specify 160 addresses or less per router.
There is no setting of next hop host number. Specify next hop host
number.
There is no specification of network address. Specify network
address.
There is no specification of forwarding network address. Specify
forwarding network address.
There is no specification of next hop network. Specify next hop
network number.
There is no specification of next hop network address. Specify next
hop network address.
An entry cannot be inserted on specified entry number.
Use entry number not exceeding the number of set entries.
An entry cannot be set on specified entry number. Use entry number
not exceeding the set number of entries. To add entries, use the
number of set entries +1 for entry value.
There is no specification of node address. Specify node address.
There is no specification of protocol type. Specify protocol type.
Server name is not specified. Specify server name.
There is no specification of forwarding socket address. Specify
forwarding socket address.
There is no setting of ticks. Specify ticks.
There is no setting of types. Specify types.
GR2K-GA-0014
Ver. 07-02