Hitachi GR2000 Series Configuration Commands page 171

Default:
Description:
Default:
Example
1. Set filter group name
config
2. Set filter group name
interface name
(config)#
3. Change the filter group name set in inbound of interface name
:
ip2
(config)#
GR2K-GA-0014
Ver. 07-02
: Outbound (specify when filtering on transmit side of
-out
frame)
Undefined
Specifies the filter group name. Set the filter group information
before entering this command.
Undefined
in inbound of interface name
ip1
in inbound and filter group name
ip1
:
ether1
Filtering/QoS Information
:
ether1
in outbound of
ip2
from
ether1 ip1
to
1-129