Line Information (Wan) - Hitachi GR2000 Series Configuration Commands

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4.7.4

Line Information (WAN)

Input Format
d e f a u l t
Parameters
The initial value items that can be set using line Information (WAN) and the initial
values during initial installation are shown in Table 4-4. For details of each
parameter, refer to the configuration definition information in "line (line Information),
Serial/OC-3c(POS)/ OC-12c(POS)/ OC-48(POS)/ BRI(leased line)/ PRI(leased line)/
J2/ BRI (ISDN)/ PRI (ISDN)/ T1 (leased line)/ E1 (leased line)/ T3 non-multiplex
(leased line)/ E3 non-multiplex (leased line)/ E3 multiplex (leased line)".
4-36 GR2K-GA-0014
Ver. 07-02