Radius (Radius Server Information) - Hitachi GR2000 Series Configuration Commands

4.5

radius (RADIUS server information)

The following is an explanation of configuration definition commands and
parameters that define information for the purpose of controlling GR2000 access
using RADIUS authentication.
This sets RADIUS servers used for authentication.
Input Format
Setting information:
Setting RADIUS server information
Setting RADIUS connection information
Changing information:
Changing RADIUS server information
Changing RADIUS connection information
Deleting information
Display information
Parameter
Description:
Default:
Range of Value:
Description:
Default:
Range of Value:
GR2K-GA-0014
Ver. 07-02
Specifies the RADIUS server IPv4 address or host name.
None
IPv4 address (dot notation) or host name is specified.
Specifies the RADIUS key used in encryption and
authentication of communication between RADIUS servers. It
is necessary to set the same RADIUS key in clients and in
RADIUS servers.
None
A character string of a password exceeding one character and
not exceeding 64 characters is set using double quotation
marks ("). Alphanumeric characters and special characters can
be entered. However, a character string can be entered without
using double quotation marks (") when no special character
(e.g., space) is contained in an entry character string. However,
notice that the characters below cannot be used.
Operation Management Information
4-27