Sap-Filtering - Hitachi GR2000 Series Configuration Commands

6. Deleting parameter
The filtering operation and mode of SAP filtering information in No. 1 are deleted.
Related Commands
ipx
ipx-interface
Precautions
If this command is inputted in the cases where changes are made on the IP routing
protocol information, the IP multicast protocol information, and the MPLS
information, and the apply command is not being executed, the apply subcommand is
executed before the command is executed, and the changed IP routing protocol
information, IP multicast routing protocol information, and MPLS information are
reflected to the operation.
2.1.7

sap-filtering

This command filters a SAP packet by setting the SAP filtering information. Filtering
can be applied on the input on output ports.
Input Format
Setting information
Changing settings
Inserting settings
GR2K-GA-0014
Ver. 07-02
IPX/Bridge Information
2-21