Bridge Information; Table 4-17 List Of Initial Values That Can Be Set Using Ipx Information And Initial Values During Initial Installation - Hitachi GR2000 Series Configuration Commands

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4.7.17

Bridge information

Input Format
d e f a u l t
Parameters
The initial value items that can be set using bridge Information and the initial values
during initial installation are shown in Table 4-17. For details of each parameter,
refer to the configuration definition information in "Section 2.2, "Bridge Objects".
Table 4-17 List of Initial Values That Can Be Set Using IPX Information and Initial
Information
Group Name
Bridge
information
4-56
Values During Initial Installation
Information Name
Designation of bridge interface
mode
spt path cost
spt priority
Bridge interface operation
FDDI translation
Extended filtering operation
Designation of extended filtering
item
Extended filtering data value
Extended filtering mask value
Extended filtering offset value
Initial Value
Operation is disabled. (no)
10
128
Possible (bridge_interface_enable)
Not translated.
(bridge_interface_translation_off)
Operates in drop. (no)
No information is provided. (off)
0x000000000000
0x000000000000
0
GR2K-GA-0014
Ver. 07-02