Hitachi GR2000 Series Configuration Commands page 190

Hitachi gigabit router configuration guide

Hide thumbs Also See for GR2000 Series:

Table of Contents

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

1. Setting parameters:

a. To set the queueA mode for priority:

b. To set the queueB mode for bandwidth (20 percent of bandwidth is allocated

to queue1 and 80 percent to queue 2):

c. To set the queueC mode for round-robin:

d. To set the queueD mode for equal minimum bandwidth and allocate

bandwidth equally by 28 queue:

e. To set minimum bandwidth of queue No. 1 to 800 to 5 kbit/s and 801 to

1000 to 10 kbit/s when interface count is 1000:

GR2K-GA-0014