Rip-Filtering - Hitachi GR2000 Series Configuration Commands

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
6. Deleting parameter
The node_address of SAP information in No. 1 are deleted.
Related Commands
ipx
ipx interface
Precautions
If this command is inputted in the cases where changes are made on the IP routing
protocol information, the IP multicast protocol information, and the MPLS
information, and the apply command is not being executed, the apply subcommand is
executed before the command is executed, and the changed IP routing protocol
information, IP multicast routing protocol information, and MPLS information are
reflected to the operation.
2.1.6

rip-filtering

This command filters a RIP packet. Filtering can be applied on the input or output
ports.
Input Format
Setting information
Changing settings
2-18 GR2K-GA-0014
Ver. 07-02