Event - Hitachi GR2000 Series Configuration Commands

3.1.4

event

Function
Object for creation, modification, deletion, and display of RMON (RFC1757) Ethernet
event-group information. A maximum of 16 event-group entries can be registered per
router. The RMON Ethernet event-group MIB contents can be referenced by the
device management command snmp. For this snmp command, see the GR2000
Operations Commands, Vol. 1.
Input Format
To create an RMON Ethernet event-group entry:
To modify an RMON Ethernet event-group entry:
To delete registered RMON Ethernet event-group entries:
To show registered RMON Ethernet event-group entries:
Parameters
Description:
Default:
Range of value:
Description:
Default:
Range of value:
Description:
GR2K-GA-0014
Ver. 07-02
Specifies the RMON Ethernet event-group index number. This
parameter corresponds to eventIndex of RFC1757.
Undefined (but cannot be omitted)
1-65535
Sets the method for alarming the specified event. The
option causes no alarm. The
event. The option causes transmission of SNMP trap to
trap
the specified community. The
alarmed event and causes transmission of SNMP trap to the
specified community. This parameter corresponds to eventType
of RFC1757.
Undefined (but cannot be omitted for the first time)
none, log, trap or log-trap
Sets the community to which an SNMP trap is transmitted
when the or
trap log_trap
parameter. The
eventCommunity of RFC1757.
option records every alarmed
log
option is specified for the
parameter corresponds to
SNMP Information
none
every
-type
3-19