Hitachi GR2000 Series Configuration Commands page 433

Table 5-5
ospf6: invalid hello-interval value at '<Value>'
not in range 1 to 255
ospf6: invalid instance value at '<Value>' not
in range 0 to 255
ospf6: invalid octet value at '<Value>' not in
range 0 to 255
ospf6: invalid OSPF6 cost value at '<Cost>'
not in range 0 to 65535
ospf6: invalid OSPF6 interface cost value at
<Cost> not in range 1 to 65535
ospf6: invalid preference value at <Value> not
in range 2 to 255
ospf6: invalid priority value at '<Value>' not in
range 0 to 255
ospf6: invalid range <Prefix>/ <Prefixlen>
ospf6: invalid retransmit-interval value at
'<Value>' not in range 1 to 65535
ospf6: invalid router-dead-interval value at
'<Value>' not in range 1 to 65535
ospf6: invalid transit-delay value at '<Value>'
not in range 1 to 65535
ospf6: neighbor-id must be an IP address
ospf6: net range already specified
ospf6: out of range
ospf6: Router ID not defined
ospf6: stub option not valid for backbone
ospf6: syntax error
ospf6: this Router ID and Neighbor ID must be
different
ospf6: transit-area can not be the 'backbone'
area
ospf6: virtual links only allowed in 'backbone'
area
rip: duplicate interface address in list at
<Address>
GR2K-GA-0014
Ver. 07-02
Routing Protocol Error Messages (continued)
The hello-interval of OSPFv3 interface parameter is invalid. Specify
within the range of 1 to 255.
<Value>: Specified hello-interval value
The OSPFv3 interface parameter instance is invalid. Specify within
the range of 0 to 255.
<Value>: Specified instance value
More than 255 values are defined in dot notation. Specify value
within the range of 0 to 255.
<Value>: Specified value
The OSPFv3 cost in configuration information is invalid. Specify
within the range of 0 to 65535.
<Cost>: Specified cost value
The OSPFv3 interface cost in configuration information is invalid.
Specify within the range of 1to 65535.
<Cost>: Specified interface cost value
The preference value is invalid. Specify within the range of 2 to 255.
<Value>: Specified preference value
The OSPFv3 interface parameter priority is invalid.
Specify within the range of 0 to 255.
<Value>: Specified priority value
Incorrect (::/0) value was specified in the network range in the area
definition of the OSPFv3. Specify the value in other than ::/0.
<Prefix>: Specified prefix
<Prefixlen>: Specified prefix length
The interface parameter retransmit-interval in OSPFv3 area
definition is invalid. Specify within the range of 1 to 65535.
<Value>: Specified retransmit-interval value
OSPFv3 interface parameter router-dead-interval is invalid.
Specify within the range of 1 to 65535.
<Value>: Specified router-dead-interval value
OSPFv3 interface parameter transit-delay is invalid.
Specify within the range of 1 to 65535.
<Value>: Specified transit-delay value
The IP address defined in the neighborhood is incorrect.
Specify it in the IP address form.
In the area definition of OSPFv3, the interface cost of an networks
parameter is double-defined. Do not double-define an networks
parameter.
The parameter-specified range is exceeded in the input command
syntax. Numeric values of more than 4294967296 are contained.
Reconfirm a parameter.
Router ID is not defined. Specify the Router ID.
Stub parameter is defined in the OSPVv3 definition. Does not specify
stub parameter in backbone area.
Syntax error
The local router ID must be different from the adjacent router ID of a
virtual link.
The passage area of a virtual link is defined in a backbone area.
Define the passage area in areas other than the backbone area.
The hypothetical link is defined in an area other than the backbone
area. Define it in the backbone area.
Interface address definition is duplicated in rip.
Use a unique interface address.
<Address>: Specified interface address
Configuration Error Messages
5-43