Hitachi GR2000 Series Configuration Commands page 132

Hitachi gigabit router configuration guide
Hide thumbs Also See for GR2000 Series:
Table of Contents

Advertisement

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Transmitter IPv6 address is designated.
If address is designated by range:
If designated by sub-net prefix length:
If all IPv6 addresses are designated: any
Default:
Range of value:
Prefix length (aaa): 0-128
Designated filter conditions by Transmitter IPv6 address.
If address to be designated is
If address is designated by range :
If designated by sub-net mask length:
If all IPv6 addresses are designated : any
Default:
Range of value:
Specifies six high-order bits in the TOS field. Comparison is made on the six
high-order bits in the TOS field of the transmission packet. The two low-order
bits are ignored even if they are set.
2
DSCP (Differentiated Services Code Point), CU (Current Unused)
Default:
Range of value:
1-90
No default is possible.
IPv6 address
No default is possible.
IPv6 address
7
6
5
4
2
2
2
DSCP
High-order 6 bits are designated.
None. (DSCP value is not included in the flow detecting
condition.
0-63 (10-decimals)
3
2
1
0
2
2
2
2
CU
GR2K-GA-0014
Ver. 07-02

Advertisement

Table of Contents
loading

Table of Contents